Changed packages:

==== Mesa ====
Version update (10.5.6 -> 10.5.7)
Subpackages: Mesa-32bit Mesa-devel Mesa-dri-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv1_CM-devel Mesa-libGLESv1_CM1 Mesa-libGLESv2-2 Mesa-libGLESv2-devel Mesa-libglapi-devel Mesa-libglapi0 Mesa-libglapi0-32bit libOSMesa-devel libOSMesa9 libOSMesa9-32bit libgbm-devel libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libwayland-egl-devel libwayland-egl1 libxatracker2

- Update to version 10.5.7:
  + i965: Emit 3DSTATE_MULTISAMPLE before WM_HZ_OP (gen8+)
  + docs: Add sha256sums for the 10.5.6 release
  + get-pick-list.sh: Require explicit "10.5" for nominating stable patches
  + cherry-ignore: add clover build fix not applicable for 10.5
  + Add release notes for the 10.5.7 release
  + nvc0/ir: set ftz when sources are floats, not just destinations
  + nv50/ir: guess that the constant offset is the starting slot of array
  + nvc0/ir: LOAD's can't be used for shader inputs
  + nvc0: a geometry shader can have up to 1024 vertices output
  + nv50/ir: avoid messing up arg1 of PFETCH
  + nv30: don't leak fragprog consts
  + nv30: avoid leaking render state and draw shaders
  + nv30: fix clip plane uploads and enable changes
  + nv30/draw: avoid leaving stale pointers in draw state
  + nv30/draw: draw expects constbuf size in bytes, not vec4 units
  + st/mesa: don't leak glsl_to_tgsi object on link failure
  + glsl: avoid leaking linked gl_shader when there's a late linker error
  + nv30/draw: fix indexed draws with swtnl path and a resource index buffer
  + nv30/draw: only use the DMA1 object (GART) if the bo is not in VRAM
  + nv30/draw: allocate vertex buffers in gart
  + nv30/draw: switch varying hookup logic to know about texcoords
  + nv30: falling back to draw path for edgeflag does no good
  + nv30: avoid doing extra work on clear and hitting unexpected states
  + i965/fs: Fix implied_mrf_writes for scratch writes
  + st/dri: fix postprocessing crash when there's no depth buffer

==== at ====

- atd.service: run After=nss-user-lookup.target not after
  systemd-user-sessions.service
- atd.service: run After=time-sync.target

==== coreutils ====

- coreutils-doc-adjust-reference-to-info-nodes-in-man-pages.patch:
  add upstream patch:
  doc: adjust reference to info nodes in man pages (boo#933396)
- coreutils-i18n.patch: Use a later version of the previous patch
  to fix the sort I18N issue (boo#928749, CVE-2015-4041) to also
  avoid CVE-2015-4042.
  https://github.com/pixelb/coreutils/commit/bea5e36cc876

==== cron ====
Subpackages: cronie

- cron.service: Start After=nss-user-lookup.target not
  after ypbind.service nscd.service
-cron.service: Crons run at wall-time, order after time-sync.target

==== cups ====
Version update (2.0.2 -> 2.0.3)
Subpackages: cups-client cups-devel cups-libs cups-libs-32bit

- Version upgrade to 2.0.3:
  The new release addresses two security vulnerabilities,
  add localizations for German and Russian, and includes several
  general bug fixes. Changes include (excerpt):
  * Security: Fixed CERT VU #810572 CVE-2015-1158 CVE-2015-1159
    exploiting the dynamic linker (STR #4609) (bsc#924208)
  * Security: The scheduler could hang with malformed gzip data
    (STR #4602)
  * Restored missing generic printer icon file (STR #4587)
  * Fixed logging of configuration errors to show up as errors
    (STR #4582)
  * Fixed potential buffer overflows in raster code and filters
    (STR #4598, STR #4599, STR #4600, STR #4601)
  * Fixed <Limit> inside <Location> (STR #4575)
  * Fixed lpadmin when both -m and -o are used (STR #4578)
  * The web interface always showed support for 2-sided printing
    (STR #4595)
  * cupsRasterReadHeader did not fully validate the raster header
    (STR #4596)
  * The rastertopwg filter did not check for truncated input
    (STR #4597)
  * The cups-lpd mini-daemon did not check for request parameters
    (STR #4603)
  * The scheduler could get caught in a busy loop (STR #4605)
  * The sample Epson driver could crash (STR #4616)
  * The IPP backend now correctly monitors jobs
    (<rdar://problem/20495955>)
  * The ppdhtml and ppdpo utilities crashed when the -D option
    was used before a driver information file (STR #4627)
  * ippfind incorrectly substituted "=port" for service_port.
  * The IPP/1.1 test file did not handle the initial print job
    completing early (STR #4576)
  * Fixed a memory leak in cupsConnectDest (STR #4634)
  * PWG Raster Format output contained invalid ImageBox values
    (<rdar://problem/21144309>)
  * Added Russian translation (STR #4577)
  * Added German translation (STR #4635)
- cups-busy-loop.patch fixed STR #4605 is obsolete because
  it is fixed upstream (see above).
- cleaned up this whole RPM changlog (wrapped too long lines if
  possible and removed trailing whitespaces).

==== git ====
Version update (2.4.2 -> 2.4.3)
Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk

- git 2.4.3:
  * Ui message corrections and improvements
  * "git pull --log" and "git pull --no-log" worked as expected,
    but "git pull --log=20" did not.
  * Fix pull.ff configuration overriding merge.ff
  * fix memory leaks and resource exhaustion errors
  * documentation fixes
  * Fix core.excludesfile priorities

==== gnome-online-accounts ====
Version update (3.16.2 -> 3.16.3)
Subpackages: gnome-online-accounts-devel libgoa-1_0-0 libgoa-backend-1_0-1 typelib-1_0-Goa-1_0

- Update to version 3.16.3:
  + Refresh credentials at startup and network changes
    (bgo#693578).
  + Avoid NULL pointer dereference when EWS autodiscover fails
    (bgo#750392).
  + Updated translations.

==== kiwi ====
Version update (7.02.53 -> 7.02.55)
Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-pxeboot kiwi-templates kiwi-tools

- v7.02.55 released
- Allow to overwrite root= via kernelcmdline
  If one of the ec2 firmware types is used the root= variable is
  explicitly set to a static value. There was no way for the user
  to set an alternative device via the kernelcmdline attribute in
  the image description
- Fixed zipl installBootLoader blocksize usage
  There is now the target_blocksize attribute which is used. If not
  specified the default blocksize of 512 bytes applies (bnc#931634)
- Fixed zipl installBootLoader blocksize retrieval
  In order to find the target blocksize for the zipl configuration
  kiwi asked for the pyhiscal blocksize. However the logical block
  size should be used when zipl accesses the device (bnc#931634)
- fix version detection for debug packages
- v7.02.54 released
- Added __checkVolumeSetup runtime check
  Checks for improper combination of boot volumes in combination
  with an extra boot partition
- Added runtime check for internal field separator
  Using the internal path field separator in volume names (_)
  requires to specify the path in an additional mountpoint
  attribute
- Fixed volume name adaptions for btrfs and zfs
  There is no need to replace any character in the name for the volume
  of a filesystem which includes a volume manager. Fixes (bnc#933909)
- Fixed evaluation of bootincluded archives
  Archives set in the bootstrap section and marked as bootinclude
  were not really used and therefore its contents were missing in
  the kiwi initrd
- Revert "Implement setup of loop blocksize"
  The user space interface will change because in order to set the
  pyhsical blocksize the value must be present on loop creation. This
  required options to the losetup call and can't be done afterwards.
  Therefore the implementation in kiwi will be reverted until the
  user space interface for losetup is final
  This reverts commit d2dfead392a7dd2064afbd59df4c4d67bcacbc98.
- Implement setup of loop blocksize
  The new loop driver capability allows to set a custom blocksize
  This patch makes use of it with the value from the optional
  target_blocksize attribute (bnc#931634)

==== libqb0 ====
Version update (0.17.1.git20150429.c3bcf25 -> 0.17.1+git20150515.35faa45)

- log: Implement "extended" logging using a marker character
- Upstream version cs: 35faa45558b0ae44e3a244fbd3e8f9405d535526

==== libtunepimp ====
Subpackages: libtunepimp-devel libtunepimp5

- Cleanup spec file with spec-cleaner
- Add baselibs.conf to sources
- Update dependencies
- Remove obsolete/provides for unsupported releses of SLE/openSUSE

==== libvirt ====
Version update (1.2.15 -> 1.2.16)
Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-qemu libvirt-daemon-xen

- Remove unsupported settings in libvirtd.socket unit file when
  systemd version < 214
  libvirtd-systemd-socket.patch
  bsc#933043
- spec: always apply Apparmor and netcontrol patches
- spec: Add libvirtd.socket unit file to service_add_pre and
  service_del_postun macros
- Update to libvirt 1.2.16
  - Introduce pci-serial
  - Introduce virDomainSetUserPassword API
  - Introduce protected key mgmt ops
  - Add domain vmport feature
  - Many incremental improvements and bug fixes, see
    http://libvirt.org/news.html
  - Drop upstream patches c0d3f608-libxl-soundhw.patch and
    8910e063-arch-caps.patch
  - Drop polkit-10-virt.rules in favor of upstream 50-libvirt.rules

==== libvirt-python ====
Version update (1.2.15 -> 1.2.16)

- Update to 1.2.16
  - Add all new APIs and constants in libvirt 1.2.16

==== pam_ssh ====
Version update (2.01 -> 2.1)
Subpackages: pam_ssh-32bit

- Update to 2.1
  * session/login/default keys lexical sort order
  * add ED25519 key support
  * updated openssh embedded code to 6.7p1
- Cleanup spec file with spec-cleaner

==== perl-DateTime ====
Version update (1.18 -> 1.19)

- updated to 1.19
  see /usr/share/doc/packages/perl-DateTime/Changes
  1.19   2015-05-31
  - If you compared a DateTime object to an undef value, you might have received
    a warning pointing to code inside DateTime.pm, instead of in your own
    code. Fixed by Jason McIntosh. GH #7.
  - The 30future-tz.t could fail if run at certain very specific times. This
    should now be much less likely, unless a time zone being tested implements a
    DST change at noon (which would even more insane than DST already is by a
    huge factor). Reported by Karen Etheridge and diagnosed by Slaven Rezic. RT
    [#102925].

==== perl-HTML-TableExtract ====
Version update (2.12 -> 2.13)

- updated to 2.13
  see /usr/share/doc/packages/perl-HTML-TableExtract/Changes
  2.14  Thu May 21 12:20:46 EDT 2015
  - bundled examples html page

==== perl-Lingua-EN-Sentence ====
Version update (0.27 -> 0.29)

- updated to 0.29
  see /usr/share/doc/packages/perl-Lingua-EN-Sentence/Changes

==== perl-Test-Exception ====
Version update (0.380000 -> 0.400000)

- updated to 0.40
  see /usr/share/doc/packages/perl-Test-Exception/Changes
  0.40   [2015-06-05]
  - Updated for changes in Test::Stream (Use Test::Stream::Sync)
  0.39   [2015-06-04]
  - Updated for changes in Test::Stream

==== perl-Test-Pod ====
Version update (1.49 -> 1.50)

- updated to 1.50
  see /usr/share/doc/packages/perl-Test-Pod/Changes
  1.50  2015-05-28T21:42:48Z
  * Restored support for ignoring directories listed in
    `%Test::Pod::ignore_dirs`, inadvertently dropped by the switch to
    File::Find in v1.46. Thanks to Julien ÉLIE for the report and diagnosis!

==== permissions ====
Version update (2014.12.03.1512 -> 2015.05.21.1505)

- remove /usr/bin/get_printing_ticket; (bnc#906336)

==== libdcerpc-binding0 ====
Subpackages: libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libgensec0 libgensec0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr0 libndr0-32bit libnetapi0 libnetapi0-32bit libregistry0 libsamba-credentials0 libsamba-credentials0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient-devel libsmbclient-raw0 libsmbclient-raw0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap0 libsmbldap0-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba samba-32bit samba-client samba-client-32bit samba-doc samba-libs samba-libs-32bit samba-winbind samba-winbind-32bit

- Order winbind.service Before and Want nss-user-lookup target.
- Remove fam-devel build-time dependency for post-6 RHEL systems.

==== libsensors4 ====
Subpackages: libsensors4-32bit libsensors4-devel

- lm_sensors-r6282-detect-graphics-card-in-all-cases.patch:
  sensors-detect: Detect graphics card in all cases (bsc#933072).
- lm_sensors-r6283-skip-addresses-0x37-0x4f-on-DDC.patch:
  sensors-detect: Skip addresses 0x37 and 0x4f on DDC channels
  (bsc#933072).

==== sysconfig ====
Subpackages: sysconfig-netconfig

- netconfig: use ntpd.service on >13.1 (boo#930309)
  [+ 0002-netconfig-use-ntpd.service-on-13.2-boo-930309.patch]

==== cdrkit-cdrtools-compat ====
Subpackages: genisoimage icedax wodim

- Use full url as source
- Update geteltorito script to latest version
  source: http://userpages.uni-koblenz.de/~krienke/ftp/noarch/geteltorito/geteltorito

==== yast2-network ====
Version update (3.1.115 -> 3.1.117)

- bnc#934180
  - fixed internal error in lan AutoYaST client.
- 3.1.117
- bnc#874259
  - keep device configuration provided via linuxrc when autoyast
    keep_install_network is set
- 3.1.116

==== yast2-storage ====
Version update (3.1.55 -> 3.1.56)

- No snapper config for LVM storage proposal (bsc#922308)
- version 3.1.56




Removed packages:
  


Added packages:
  bundle-lang-common-ko
  bundle-lang-gnome-nl
  fcitx
   > fcitx-branding-openSUSE
   > fcitx-gtk2
   > fcitx-gtk3
   > fcitx-pinyin
   > fcitx-qt4
   > fcitx-table
   > libfcitx-4_2_9
  fcitx-chewing
  fcitx-cloudpinyin
  fcitx-config-gtk3
  fcitx-googlepinyin
  fcitx-libpinyin
  fcitx-qt5
  fcitx-sunpinyin
  fcitx-table-cn-wubi-large
   > fcitx-table-tw-boshiamy
   > fcitx-table-tw-cangjie-large
   > fcitx-table-tw-cangjie5
   > fcitx-table-tw-smart-cangjie6
  fcitx-zhuyin
  fcitx-config-kde5
   > fcitx-config-kde5-icons
  chewing-data
   > chewing-utils
   > libchewing3
  fcitx-mozc
  libpresage1
   > presage-data