Packages changed:
  busybox-links
  ima-evm-utils
  podman (2.0.6 -> 2.1.1)
  systemd (246.4 -> 246.6)
  wicked (0.6.63 -> 0.6.64)

=== Details ===

==== busybox-links ====
Subpackages: busybox-coreutils busybox-gawk busybox-grep busybox-gzip busybox-psmisc busybox-xz

- Don't fail if rpm will not be build

==== ima-evm-utils ====
Subpackages: evmctl libimaevm2

- Fix missing new line in help
  (0001-help-Add-missing-new-line-for-ignore-violations.patch)

==== podman ====
Version update (2.0.6 -> 2.1.1)
Subpackages: podman-cni-config

- Added patch varlink.patch to disable needless varlink code
  generation. This would cause compile failures in OBS.
  (https://github.com/containers/podman/pull/7854)
- Cleanup %build section a bit and no longer build in GOPATH.
  This shouldn't be needed anymore.
- Path BUILDFLAGS via enviroment variable to allow it being
  appended to the corresponding Makefile variable instead of
  completely overriding it.
- Install new auto-update system units
- Update to v2.1.1:
  * Changes
  - The `podman info` command now includes the cgroup manager
    Podman is using.
  * API
  - The REST API now includes a Server header in all responses.
  - Fixed a bug where the Libpod and Compat Attach endpoints
    could terminate early, before sending all output from the
    container.
  - Fixed a bug where the Compat Create endpoint for containers
    did not properly handle the Interactive parameter.
  - Fixed a bug where the Compat Kill endpoint for containers
    could continue to run after a fatal error.
  - Fixed a bug where the Limit parameter of the Compat List
    endpoint for Containers did not properly handle a limit of 0
    (returning nothing, instead of all containers) [#7722].
  - The Libpod Stats endpoint for containers is being deprecated
    and will be replaced by a similar endpoint with additional
    features in a future release.
- Changes in v2.1.0
  * Features
  - A new command, `podman image mount`, has been added. This
    allows for an image to be mounted, read-only, to inspect its
    contents without creating a container from it [#1433].
  - The `podman save` and `podman load` commands can now create
    and load archives containing multiple images [#2669].
  - Rootless Podman now supports all `podman network` commands,
    and rootless containers can now be joined to networks.
  - The performance of `podman build` on `ADD` and `COPY`
    instructions has been greatly improved, especially when a
    `.dockerignore` is present.
  - The `podman run` and `podman create` commands now support a
    new mode for the `--cgroups` option, `--cgroups=split`.
    Podman will create two cgroups under the cgroup it was
    launched in, one for the container and one for Conmon. This
    mode is useful for running Podman in a systemd unit, as it
    ensures that all processes are retained in systemd's cgroup
    hierarchy [#6400].
  - The `podman run` and `podman create` commands can now specify
    options to slirp4netns by using the `--network` option as
    follows:  `--net slirp4netns:opt1,opt2`. This allows for,
    among other things, switching the port forwarder used by
    slirp4netns away from rootlessport.
  - The `podman ps` command now features a new option,
    `--storage`, to show containers from Buildah, CRI-O and other
    applications.
  - The `podman run` and `podman create` commands now feature a
    `--sdnotify` option to control the behavior of systemd's
    sdnotify with containers, enabling improved support for
    Podman in `Type=notify` units.
  - The `podman run` command now features a `--preserve-fds`
    opton to pass file descriptors from the host into the
    container [#6458].
  - The `podman run` and `podman create` commands can now create
    overlay volume mounts, by adding the `:O` option to a bind
    mount (e.g. `-v /test:/test:O`). Overlay volume mounts will
    mount a directory into a container from the host and allow
    changes to it, but not write those changes back to the
    directory on the host.
  - The `podman play kube` command now supports the Socket
    HostPath type [#7112].
  - The `podman play kube` command now supports read-only mounts.
  - The `podman play kube` command now supports setting labels on
    pods from Kubernetes metadata labels.
  - The `podman play kube` command now supports setting container
    restart policy [#7656].
  - The `podman play kube` command now properly handles
    `HostAlias` entries.
  - The `podman generate kube` command now adds entries to
    `/etc/hosts` from `--host-add` generated YAML as `HostAlias`
    entries.
  - The `podman play kube` and `podman generate kube` commands
    now properly support `shareProcessNamespace` to share the PID
    namespace in pods.
  - The `podman volume ls` command now supports the `dangling`
    filter to identify volumes that are dangling (not attached to
    any container).
  - The `podman run` and `podman create` commands now feature a
    `--umask` option to set the umask of the created container.
  - The `podman create` and `podman run` commands now feature a
    `--tz` option to set the timezone within the container [#5128].
  - Environment variables for Podman can now be added in the
    `containers.conf` configuration file.
  - The `--mount` option of `podman run` and `podman create` now
    supports a new mount type, `type=devpts`, to add a `devpts`
    mount to the container. This is useful for containers that
    want to mount `/dev/` from the host into the container, but
    still create a terminal.
  - The `--security-opt` flag to `podman run` and `podman create`
    now supports a new option, `proc-opts`, to specify options
    for the container's `/proc` filesystem.
  - Podman with the `crun` OCI runtime now supports a new option
    to `podman run` and `podman create`, `--cgroup-conf`, which
    allows for advanced configuration of cgroups on cgroups v2
    systems.
  - The `podman create` and `podman run` commands now support a
    `--override-variant` option, to override the architecture
    variant of the image that will be pulled and ran.
  - A new global option has been added to Podman,
    `--runtime-flags`, which allows for setting flags to use when
    the OCI runtime is called.
  - The `podman manifest add` command now supports the
    `--cert-dir`, `--auth-file`, `--creds`, and `--tls-verify`
    options.
  * Security
  - This release resolves CVE-2020-14370, in which environment
    variables could be leaked between containers created using
    the Varlink API.
  * Changes
  - Podman will now retry pulling an image 3 times if a pull
    fails due to network errors.
  - The `podman exec` command would previously print error
    messages (e.g. `exec session exited with non-zero exit code
  - 1`) when the command run exited with a non-0 exit code. It
    no longer does this. The `podman exec` command will still
    exit with the same exit code as the command run in the
    container did.
  - Error messages when creating a container or pod with a name
    that is already in use have been improved.
  - For read-only containers running systemd init, Podman creates
    a tmpfs filesystem at `/run`. This was previously limited to
    65k in size and mounted `noexec`, but is now unlimited size
    and mounted `exec`.
  - The `podman system reset` command no longer removes
    configuration files for rootless Podman.
  * API
  - The Libpod API version has been bumped to v2.0.0 due to a
    breaking change in the Image List API.
  - Docker-compatible Volume Endpoints (Create, Inspect, List,
    Remove, Prune) are now available!
  - Added an endpoint for generating systemd unit files for
    containers.
  - The `last` parameter to the Libpod container list endpoint
    now has an alias, `limit` [#6413].
  - The Libpod image list API new returns timestamps in Unix
    format, as integer, as opposed to as strings
  - The Compat Inspect endpoint for containers now includes port
    information in NetworkSettings.
  - The Compat List endpoint for images now features limited
    support for the (deprecated) `filter` query parameter [#6797].
  - Fixed a bug where the Compat Create endpoint for containers
    was not correctly handling bind mounts.
  - Fixed a bug where the Compat Create endpoint for containers
    would not return a 404 when the requested image was not
    present.
  - Fixed a bug where the Compat Create endpoint for containers
    did not properly handle Entrypoint and Command from images.
  - Fixed a bug where name history information was not properly
    added in the Libpod Image List endpoint.
  - Fixed a bug where the Libpod image search endpoint improperly
    populated the Description field of responses.
  - Added a `noTrunc` option to the Libpod image search endpoint.
  - Fixed a bug where the Pod List API would return null, instead
    of an empty array, when no pods were present [#7392].
  - Fixed a bug where endpoints that hijacked would do perform
    the hijack too early, before being ready to send and receive
    data [#7195].
  - Fixed a bug where Pod endpoints that can operate on multiple
    containers at once (e.g. Kill, Pause, Unpause, Stop) would
    not forward errors from individual containers that failed.
  - The Compat List endpoint for networks now supports filtering
    results [#7462].
  - Fixed a bug where the Top endpoint for pods would return both
    a 500 and 404 when run on a non-existant pod.
  - Fixed a bug where Pull endpoints did not stream progress back
    to the client.
  - The Version endpoints (Libpod and Compat) now provide version
    in a format compatible with Docker.
  - All non-hijacking responses to API requests should not
    include headers with the version of the server.
  - Fixed a bug where Libpod and Compat Events endpoints did not
    send response headers until the first event occurred [#7263].
  - Fixed a bug where the Build endpoints (Compat and Libpod) did
    not stream progress to the client.
  - Fixed a bug where the Stats endpoints (Compat and Libpod) did
    not properly handle clients disconnecting.
  - Fixed a bug where the Ignore parameter to the Libpod Stop
    endpoint was not performing properly.
  - Fixed a bug where the Compat Logs endpoint for containers did
    not stream its output in the correct format [#7196].

==== systemd ====
Version update (246.4 -> 246.6)
Subpackages: libsystemd0 libudev1 systemd-logger systemd-sysvinit udev

- Import commit d7b5ac76dc95ddf30e707d26998e36303e9f52a7 (merge of v246.6)
  For a complete list of changes, visit:
  https://github.com/openSUSE/systemd/compare/1cab0d44584687ace92d1df30eadf264231e3b65...d7b5ac76dc95ddf30e707d26998e36303e9f52a7
- Ship {/usr/lib,/etc}/systemd/network directories in the main package
  These directories can be used by both udevd and networkd.
- Remove dangling symlink
  /usr/lib/systemd/system/sockets.target.wants/systemd-journald-audit.socket
  Otherwise the build system complains.
- Import commit 1cab0d44584687ace92d1df30eadf264231e3b65 (include v246.5)
  304ec2c7ab fstab-generator: add 'nofail' when  NFS 'bg' option is used (bsc#1176513)
  6ae277fb37 test: adapt TEST-21-SYSUSERS for SUSE
  acd8bfd2cc test: adapt TEST-13-NSPAWN-SMOKE for SUSE
  [...]
  For a complete list of changes, visit:
  https://github.com/openSUSE/systemd/compare/a4e393eecb9dbe140a6c7d57419c291d786155cf...1cab0d44584687ace92d1df30eadf264231e3b65

==== wicked ====
Version update (0.6.63 -> 0.6.64)
Subpackages: wicked-service

- version 0.6.64
- avoid incomplete ifdown/timeout on route deletion error (bsc#1174099)
- dhcp4: add DHCLIENT_CREATE_CID to ifcfg (jsc#SLE-15770)
- wicked: fixes to ifreload on port changes (bsc#1168155,bsc#1172082)
- team: fix schema to use correct hwaddr_policy property (boo#1171234)
- team: enable ipv6 on ports when nsna_ping linkwatch is used (bsc#959556)